[Increased reliability]
Can reliably insert a hose as deep as the root portion of the fitting.TOYOCONNECTORS prevent hoses being pulled out, and liquids being leaked because of their innovative mechanical structures. [Realization of reducing working time]
The installation section for the piping is separated from the insertion section for the hose. You can install and remove the hose easily and operation efficiency is improved.( Figure 1 ) In addition, the occurrence of kinked hose can also be prevented. [Realization of work standards]
TOYOCONNECTOR do not require time-consuming extra tightening work because of their innovative mechanical structures. Installation work can be standardized. [Lightweight]
The lightweight hose, made entirely of plastic, means work can be done more efficiently.
*Specifications of TOYOCONNECTOR
Part No.
Screw spec
Dimension (mm)
Weight g
Package unit
L
Fd1
E
G
g
(pcs)
TCP Type (color : gray)
TCP-9-R3/8
R3/8
50.0
6.0
30
24
26
20
TCP-12-R1/2
R1/2
57.0
9.0
32
27
35
20
TCP-15-R1/2
R1/2
61.5
11.2
41
32
53
20
TCP-19-R3/4
R3/4
68.5
14.8
42
37
70
10
TCP-25-R1
R1
75.7
20.2
52
47
113
10
TCP-ST Type (color : ivory)
TCP-ST9-R3/8
R3/8
50.0
6.0
30
24
26
20
TCP-ST12-R1/2
R1/2
57.0
9.0
32
27
35
20
TCP-ST15-R1/2
R1/2
61.5
11.2
41
32
54
20
TCP-ST19-R3/4
R3/4
68.5
14.8
42
37
71
10
TCP-ST25-R1
R1
75.7
20.2
52
47
115
10
*Material : polyacetal (nipple, inner fitting, washer and cap nut), NBR(rubber cap)
*Standards for spare parts
In principle, the TCP type should be used only once. However, the TCP type may be reused by replacing rubber caps and inner fittings, but only when it is free from damage, bleaching, cracking, deforming in the cap nut and nipples.
*Spare rubber caps for TCP
*Identification of rubber cap
Always use the correct size rubber cap according to the hose. Each types are different in the wall thickness of the rubber cap and are not compatible.
Please make sure that length B of the wrench is longer than length A of the cap nut (Figure 2). If length B is shorter than length A, the corner of the wrench may damage the plastic so that they cannot be used. Do not use a pipe wrench because it will damage the nut.
Please avoid using outdoors. The sunlight will deteriorate the strength of the plastic and will reduce its life expectancy.
The TCP type is made of polyacetal resin, so do not use it for nitric acid, acidum hydrochloricum, sulfuric acid, and other strong acids.
Code
Applicable connector
Package unit
(pcs)
TCP-9-RIS
TCP-9-R3/8
20
TCP-12-RIS
TCP-12-R1/2
20
TCP-15-RIS
TCP-15-R1/2
20
TCP-19-RIS
TCP-19-R3/4
10
TCP-25-RIS
TCP-25-R1
10
TCP-ST9-RIS
TCP-ST9-R3/8
20
TCP-ST12-RIS
TCP-ST12-R1/2
20
TCP-ST15-RIS
TCP-ST15-R1/2
20
TCP-ST19-RIS
TCP-ST19-R3/4
10
TCP-ST25-RIS
TCP-ST25-R1
10
*Polyacetal (inner fitting)，NBR(rubber cap)
*Specifications of TOYOCONNECTOR + applicable Hose sets
Applicable hose
TOYOCONNECTOR
Applicable hose
Specification
Part No.
Hose code
I.D.×O.D. (mm)
Working pressure* (MPa)
Working temperature (℃)
TCP type(resin)
TCP-9-R3/8
TG-9
9x15
(-)0.1-0.8
(-)5-60
TS-9
9x15
(-)0.1-0.8
TSG-9
9x15
0-1.5
TR-9
9x15
0-1.0
TCP-12-R1/2
TG-12
12x18
(-)0.1-0.5
TS-12
12x18
(-)0.1-0.5
TSG-12
12x18
0-1.5
TR-12
12x18
0-0.8
TCP-15-R1/2
TG-15
15x22
(-)0.1-0.5
TS-15
15x22
(-)0.1-0.5
TSG-15
15x22
0-1.5
TR-15
15x22
0-0.8
TCP-19-R3/4
TG-19
19x26
(-)0.1-0.4
TS-19
19x26
(-)0.1-0.4
TSG-19
19x26
0-1.0
TR-19
19x26
0-0.6
TCP-25-R1
TG-25
25.4x33.4
(-)0.1-0.4
TS-25
25x33
(-)0.1-0.4
TSG-25
25x33
0-1.0
TR-25
25x33
0-0.6
TCP-ST type(resin)
TCP-ST 9-R3/8
ST-9
9.5x15
0-1.0
(-)5-60
TD-9G
9.5x15x23
0-1.0
TCP-ST12-R1/2
ST-12
12x17
0-0.8
TD-12G
12x17x25
0-0.8
TCP-ST15-R1/2
ST-15
15x21
0-0.8
TD-15G
15x21x29
0-0.8
TCP-ST19-R3/4
ST-19
19x25
0-0.6
TD-19G
19x25x35
0-0.6
TCP-ST25-R1
ST-25
25x32
0-0.6
TD-25G
25x32x44
0-0.6
*Hose set : hose connected with TOYOCONNECTOR
*Working pressure : Because -0.1 MPa is an approximate value, it may be not appropriate for use depending or certain use and conditions.
