[Quick
Installation]
Require no covering; therefore, easy to install and shorten
the installation time. It has a mark every 1 m for easy measurement
and can be cut by scissors. [Cost Reduction]
Lower cost than stainless steel tubes. Can be bent freely. [Safe and Comfortable Working Environment]
No floor wetting due to dew, which prevents the slippery floor
and electrical short circuit. No need for draining and cleaning.
* Specifications
External Appearance
Code
Hose Size
Foam
Thickness
Working
Pressure
Gross
Weight
Length
Min,bending
radius
mm
inch
mm
MPa(kgf/cm2)
kg
m
mm
Outer Layer Color:Gray
TD-9G
9×15×23
3/8
4
0-1.0 (0-10)
9
50
95
TD-12G
12×18×26
1/2
4
0-0.8 (0-8)
10
50
120
TD-15G
15×22×30
5/8
4
0-0.8 (0-8)
14
50
150
TD-19G
19×26×36
3/4
5
0-0.6 (0-6)
16
40
190
TD-25G
25×33×45
1
6
0-0.6 (0-6)
13
25
250
* Working Temperature Range (-)5-60°C
* When the TOYODROP hose is used, it is necessary to have either an
insulating cover or a TD tape to cover the joints in order to prevent
dew formation.
The insulating joint cover is for the above matching hose, band and joint. If the cover mismatches, the result may not be achieved and may cause damages.